Applies to Models: All rack mountable Hanwha branded DELL Servers.
WARNING: The steps below are for instructional purposes or emergency use only. Hanwha Techwin America recommends that a only a qualified IT Professional attempt this process. Hanwha Techwin America and its affiliates are not responsible/will not accept responsibility for damage to hardware, hardware components, loss/corruption of data, or any damages resulting from using this process.
If your rack-mountable Hanwha branded DELL Server did not come with installation instructions, follow the below steps.
Step By Step Guide:
1. Mount your server into a rack
Note: Non-Desktop Hanwha branded DELL Servers are intended to be rack mounted.
Failure to rack mount your server may impact performance or cause physical damage to the unit.
2. Connect a monitor to the server
Note: Every Hanwha branded DELL Servers come with display adaptors (dongle);
choose the correct adaptor for your application based on the server's GUP and display device.
3. Connect both power cables
Note: Most Hanwha branded DELL Servers larger than 1U have redundant power supplies.
This requires two power cables plugged into a power source.
4. Press the Power button in the front of the server, top right corner
5. The server will take about 3 minutes to show the video
6. Proceed through the standard Windows setup