PRODUCT CATEGORY: Network Camera
MODEL NUMBER: SNV-6084R
TECH TIP SUBJECT: Network and Power Cable Installation
When using this model in an outdoor or other moisture rich environment proper preparation and installation of the rubber sealing plugs is essential. Below are pictures showing the actual process. The RJ-45 jack must be attached to the network cable AFTER the cable is inserted through the rubber sealing plug.
The alarm/audio cable assembly (w/sealing plug installed) is included with the camera. The power cable is included with the camera but must be installed and is required for the 24V AC heater operation even if the unit is POE powered.
CAUTION: After the nipples are removed, they cannot be reattached.