While the SRN-1000 production has ended, new products like the SPE-410 encoders even if not supported from the setup page, video feeds from the encoders can be recorded and displayed. One known limitation with some new products is that event management is not supported.
To record video from the encoders, the RTSP method can be used.
The example below shows how to implement each channel in the recorder setup.
Sensor # range is from 0-3 (0 = Channel 1, 1 = Channel 2…)
Example of setting up channels 1 to 3
login is for example:admin
password is: password
Please note , you must set a number off, channel #1 is 0