Follow

Using SRN-1000 with SPE-410 or SPE-1610

While the SRN-1000 production has ended, new products like the SPE-410 encoders even if not supported from the setup page, video feeds from the encoders can be recorded and displayed. One known limitation with some new products is that  event management is not supported.

To record video from the encoders, the RTSP method can be used.

 

SRN-1000_-1.PNG

 

 

The example below shows how to implement each channel in the recorder setup.

rtsp://<DeviceIP>:<port>/<channel#>/profile2/media.smp

rtsp://admin:<password>@<DeviceIP>:<port>/<channel#>/profile2/media.smp

Sensor # range is from 0-3 (0 = Channel 1, 1 = Channel 2…)

 

Registering_Encoder_into_SRN-1000.PNG

 

 

Example of setting up channels 1 to 3

login is for example:admin

password is: password

RTSP://admin:password@192.168.100.XX/0/profile2.media.smp

RTSP://admin:password@192.168.100.XX/1/profile2.media.smp

RTSP://admin:password@192.168.100.XX/2/profile2.media.smp

Important:

Please note , you must set a  number off,  channel #1 is 0

 

multiple_channels.PNG

 

 

 

 

 

 

 

 

Copyright © 2016 Hanwha Techwin America.
All rights reserved