WAVE: Using the SPE-400 with Wisenet WAVE

The SPE-400 is a four (4) channel Hanwha encoder that takes an IP address and different MAC address per channel.


Before attaching an SPE-400 encoder to Wisenet WAVE:

  • Update your encoder to the latest firmware: SPE-400_v2.35_160613
  • For devices running firmware versions below v2.xx, a bridge firmware must be installed prior to the latest firmware release.


Each channel on the encoder must be updated individually.

Once the firmware update has been completed, register each camera to WAVE.

Copyright © 2021 Hanwha Techwin America.
All rights reserved