Follow

Network Recorder - Setting up IVA (Intelligent Video Analytics) event

  1. Access the setup screen on the recorder
  2. Find and select the menu to set the Record Schedule to do Event Recordingmceclip0.png
  3. Next go to Event\Camera Event and Select Camera Event "ON". mceclip1.png
  4. Select "Camera MD/VA Setup",  Make sure MD is not enabled.IVA_Setup_in_XRN-1610.jpg
  5. Access the Camera Website" via the NVR.
  6. Enable IVA, in the example "Line Crossing" line crossing is used

 IVA_in_the_XNV-6080_triggered.jpg The IVA recordings in the NVR are Camera Event Recording, Here is the same IVA (Shown in purple):

IVA_on_the_XRN-1610.jpg

Copyright © 2019 Hanwha Techwin America.
All rights reserved