Follow

Wisenet WAVE - Message "Not enough HDD/SSD speed for recording" with RAID configuration

Error_message1.PNG

When using a WAVE Server with RAID configuration and the message "Not enough HDD/SSD speed for recording" displays, try the following.

Locate the MegaRAID Storage Manager utility in Windows.

 

MegaRaid_IP_1.PNG

Enter user Name and Password, the username is admin, the password is the Windows password.

MegRAID_login.JPG

Once logged in please click on the Logical tab and choose Virtual Drive.

Logical1.PNG

Right Click Virtual drive and select Set Virtual Drive Properties.

Virtual_Drive_properties1.PNG

 

On  Write Policy please select Always Write Back, please don't choose select Write Through.

Alwyas_right_back_1.PNG

Please refer to the graphic below of the incorrect selection which HDD F has reached 100% utilization.

Slow_writing1.PNG

Below is a graphic showing the correct selection and better utilization.

noraml_writing_1.PNG 

 

 

 

Copyright © 2021 Hanwha Techwin America.
All rights reserved