Follow

Network Recorder - XRN Series Display a single camera on a second monitor

The XRN Series NVR are capable of driving 2 monitors (HDMI as primary, VGA as secondary). 

Follow the steps below to configure your XRN NVR to display a single camera (spot out) using the VGA output. 

Step 1 - Log into the unit, select SETUP

Step 2 - Select DEVICE

Step 3 - Select MONITOR

Step 4 - Select EXPAND and Click on SETUP

mceclip0.png

Strep 5 - Select Layout Mode "1" and select the camera that you would like to display.

mceclip1.png 

Step 6 - Don't forget to hit OK on to return to the previous menu. 

Your secondary monitor via VGA should now display a single camera view from the camera channel selected. 

Copyright © 2019 Hanwha Techwin America.
All rights reserved