Follow

Wisenet Wave - Subnet scan to add cameras in bulk to Wave 4.XX

To add multiple cameras in a particular subnet in bulk to Wave 4.XX or higher. Please perform the following:

 

Wave_Subnet_scan.png

Right click on the name of the server. Then click on add device.

Wave-subnetscan.png

There are two tabs. Known Address and Subnet Scan. Click Subnet Scan.

Provide a starting IP and an ending IP.

This will find any unit in that range. If you provide the proper credentials in the fields to the right. When you check the box for the units. It will add them to Wave and connect successfully.

 

 

Copyright © 2019 Hanwha Techwin America.
All rights reserved