The Wave Advanced server settings window is for diagnostic purposes only. And should NEVER be used without consulting Hanwha Support directly. The only reason to enable these is for us to better diagnose an issue with your site(s.)
The Warning at the top of the Advanced screen is the most telling(See Below.)
These screens are accessed by logging into your server through a browser.
You will put in the IP of your server with the port of 7001:
Your Server IP:7001
You will be prompted to log in. Use the "admin" account
You will see the url resolve to the following:
http://(Your Server IP):7001/static/index.html#/settings/server
Change the url to the following:
http://(Your Server IP):7001/static/index.html#/advanced
Find the Log Settings area:
Normally only the HWID and Main log level are enabled. Once Support has determined what is effecting your Wave install. Please revert the log settings back to normal. Otherwise excessive logging can lead to performance degradation.
In older versions of Wave, Verbose is referred to as Debug2.
If we need every transaction in the system. This is going to be the logging level. We may have you turn all logging on in every section listed above. But once we are done. Please revert back to the items listed above.