Follow

Hivision IP Cameras Integration with Hanwha NVRs.

Issue: Cannot register Hikvision IP cameras to Hanwha NVRs

Solution:

ONVIF protocol has been disabled by default in Hikvision IP camera firmware versions since v5.5.0.

Enabling ONVIF Protocol using the camera Web Interface

  1. Open a Web browser.
  2. Access your camera by using its IP address.
  3. Go to CONFIGURATION > NETWORK > ADVANCED SETTINGS > INTEGRATION PROTOCOL.
    mceclip0.png
  4. Check the Enable ONVIF checkbox.
  5. Click the Add button to display the Add User window. NOTE: The maximum number of users is 32.
    mceclip1.png
  6. Input a user name into the User Name field.
  7. Input a password into the Password field.
  8. Re-input the password in the Confirm field.
  9. Check the appropriate user level radio button in the Level section: Administrator – Unrestricted access to all settings.
    mceclip2.png
  10. Save Setting
Copyright © 2019 Hanwha Techwin America.
All rights reserved