Applies to Models: TID-600R
Summary:
Configure WAVE to change layout to show intercom video when the intercom button pressed while
handles the audio with an SIP phone.
Step By Step Guide:
1. Add the intercom from WAVE by right-clicking on the name of the server and then selecting Add Device option.
* Compatible WAVE Version: 4.2.0.34257
https://sync.wavevms.com/downloads/4.2.0.34257
In-Client Upgrade:
Build Number: 34257
Password: 5d8jtw
2. Type in the IP address of the intercom, user name, and password. Click on the Search button.
3. Check the box next to the intercom name, and then click on the Add all Devices button at the bottom.
4. Right-click on the Layouts, and then select the New Layout option.
5. Name the layout of your choice.
6. Select the layout that you have just created and customize the layout by drag and drop the cameras that you want to see when the intercom call is detected.
6. Press Ctrl and E key on the keyboard to bring up the event Rules window. Press the Add button to create the event.
7. Set the parameter as below (The Intercom layout will be displayed when the call is triggered from the intercom)
When: Analytics Event : Starts
At: TID-600R
Event Type: Call Request
Do: Open layout
Interval of action: Instant (Check off the box)
Layout: Name of the layout created from Step 4
Show to: The user account that the layout was created (The layout will not show if you do not select the user that the layout was created from)
7. Optional setting. Set the parameter as below to change back to the original layout after the user-defined time frame after the call.
When: Analytics Event : Stops
At: TID-600R
Event Type: Call Request
Do: Open layout
Interval of action: Define time here. Check the box and set it to your preferred time.
Layout: Name of the layout created from Step 4
Show to: The user account that the layout was created (The layout will not show if you do not select the user that the layout was created from)
7. The audio can be picked up by SIP phone or Softphone