Applies to Models: Hanwha Techwin America cameras, encoder, decoders

In an effort to maintain standards, Hanwha Techwin America uses the web UI for 
all knowledge base articles pertaining to product configuration. Open Chrome,
enter the IP Address of your device into the URL bar, and press enter. 
If you are not using the web UI to configure your device, please refer to the
user manual for your product.

Summary:

The default IP address for Hanwha all Hanwha cameras, encoders, and decoders is:

192.168.1.100

Step By Step Guide:

1. If you power up the camera on a power injector or switch without DHCP running, the device in question will be at 192.168.1.100

NOTE: Since our devices ship in DHCP mode, if our products are placed on a
network with a functioning DHCP server, the device will obtain an IP from 
that server upon bootup completion

2. Type the IP into the URL bar of your browser, then press enter